Motor controllers built around your application
From 20 mm pump-integrated drives to 100,000+ rpm spindle inverters, we design and manufacture BLDC, PMSM, stepper and asynchronous motor controllers for OEMs, in West Yorkshire, under ISO 9001.
No two applications load a motor the same way. A peristaltic dosing pump, a CNC spindle and a drone motor each have different duty cycles, failure modes and efficiency targets. A generic controller that is "good enough" for all of them is rarely right for any of them.
We match the control strategy, power stage, firmware and form factor to your motor and your product, then prove it on our own dynamometer and power analyser test bench. Below are the areas where we do most of our work.
Pump controllers and drives
BLDC, PMSM, IPM and stepper controllers for centrifugal, gear, submersible and peristaltic pumps. Sensored or sensorless, from sub-5 W units built into the pump housing to 30 A+ industrial platforms. Includes closed-loop stepper control (to NEMA 42, 48 V, 1/256 microstepping) for accurate dosing.
High-speed and high-frequency spindles
Low-inductance motors defeat many standard sensorless methods, causing current ripple, poor speed control and lost efficiency. Our drive methods keep them stable and efficient, for applications from drones to precision spindles. Low-inductance controllers →
Low-inductance motors
Low-inductance motors defeat many standard sensorless methods, causing current ripple, poor speed control and lost efficiency. Our drive methods keep them stable and efficient, for applications from drones to precision spindles.
Integrated motor controllers
Controllers designed into your motor or pump casing, as a piggyback board, or as PCB- and DIN-rail-mounted modules. Fewer cables, better thermal paths, quicker assembly and fewer wiring errors on your line.
Our latest motor control case studies
Why OEM's choose Zikodrive...
- Design and manufacture under one roof. The team that designs your controller builds it, so design-for-manufacture is built in from day one.
- Tested, not estimated. Efficiency and thermal performance are measured on our dynamometer and precision power analyser, not taken from a datasheet.
- Built for harsh environments. In-house conformal coating and potting, with designs delivered for −40 °C to 125 °C operation.
- Quality you can audit. ISO 9001 certified, with assembly to IPC-A-610.
- Prototype to volume. The same design and process take you from first samples to ongoing production, supplied pre-programmed and ready to fit.
Tell us about your motor and your application. Our engineers will come back to you with the right approach, whether that's an existing platform or a custom design.